Re: Nooblet here on the forum

Mohawk on Thu 29 Jan 2009, 5:18 pm

DHK Rob wrote:Well, thank's for the warm welcome ,and if 55 makes it to dyno day....i'll be there . The 2276 was built by Grease Monkey Racing (GMR) out of Southern Cali.( A club member). It has a 82mm CB crank, Mahle 94mm piston's and cylinder's, Schadek oil pump 30mm?(don't remember the size), Engle 120 cam, CB 044 head's with 40x35.5 valves no porting(not sure on the ratio for the rocker arm's), Chromoly I beam's,Weber 44 idf's, 8.5:1 CR, lightened flywheel,Full flow, Compufire electronic ignition(coil packs) and I am hoping for 150-160 hp at the fly wheel. Left room on the table for more HP , I know...but this is going to be my daily so I'm sure I will be happy. If I do decide to get a wild hair up my ass and do some head work....anyone do port and polishing on here?

Not to make you disappointed, but 150-160 with no porting on the heads and only 8.5:1 in CR are not possible . Maybe 110 to maximum 130hp would I guess What a Face

Let us see at the Dyno day and hope. If you are right will I give you a free beer cheers

DHK Rob on Thu 29 Jan 2009, 5:48 pm

I hope to have 120-130HP to the ground, but I was speaking of flywheel HP.

Mohawk on Thu 29 Jan 2009, 6:12 pm

And I was talking flywheel Hp Rolling Eyes

DHK Rob on Thu 29 Jan 2009, 6:32 pm

Well, you kinda threw me off when you said we would see at dyno day....being the dyno is at the wheel's. Rolling Eyes

overspray on Thu 29 Jan 2009, 7:04 pm

DHK Rob wrote:anyone do port and polishing on here?

Go with pro flow Performance....or Jake Raby.....

DHK Rob on Thu 29 Jan 2009, 7:33 pm

I almost bought the 2276cc ProFlow had on the samba about 6-7 months ago....I was late getting to it. I hear they are good people. Just talked to my builder and he said my CR was 9:1, and said I should have 150 hp to the ground....give or take a little. We will see...I think that is high myself.

overspray on Thu 29 Jan 2009, 10:31 pm

I think it's way HIGH Shocked

... i'm running 2275 11:1 with Hours of head work.....lota lift and 48's and only made 168 to the ground.....

But I hope you do make close to that...... I know it sucks looking for big numbers and walk away with half.... Evil or Very Mad

sploval53 on Thu 29 Jan 2009, 10:45 pm

thats why you go in like me looking to beet like 80hp lol
my 1915 made almost 80 with a 36 del

DHK Rob on Thu 29 Jan 2009, 11:51 pm

overspray wrote:I think it's way HIGH ... i'm running 2275 11:1 with Hours of head work.....lota lift and 48's and only made 168 to the ground.....

But I hope you do make close to that...... I know it sucks looking for big numbers and walk away with half....

You run pump gas or race to get that? This you? http://www.youtube.com/watch?v=8ReKByRE-Q0

overspray on Fri 30 Jan 2009, 12:53 am

race and no that's not me....

Cave Man on Fri 30 Jan 2009, 7:25 am

sploval53 wrote:thats why you go in like me looking to beet like 80hp lol
my 1915 made almost 80 with a 36 del

Thats just a lil less than my 1776 Razz

. But I did have 2 36 dells.

sploval53 on Fri 30 Jan 2009, 11:50 pm

just wait cave
i got something 4 ya

DHK Rob on Sat 31 Jan 2009, 7:14 am

Sound's like a challenge to me

sploval53 on Sat 31 Jan 2009, 10:45 am

its been going on for a while
lol

Cave Man on Sat 31 Jan 2009, 8:03 pm

DHK Rob wrote:Sound's like a challenge to me

Yep Im gonna let him step up with a 1915 to my mild lil 1776 cheers

. Maby he can keep up wiff the lil motor. Ill even help him get it tuned Laughing

.

So bring on the "Tater Bug" on big boy shifting

.